Item # PE184C, Electric Pump Hydraulic PE18 Series Up to 55 Ton On Metro Hydraulic

Catalog

Request Information

Vanguard Jr. pumps provide two-speed high performance in a light-weight, compact package.
Gauge port provided on pump. Metal reservoir on all models.
Equipped with a 1/2 hp, 110/115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage.
Low amperage draw permits use with smaller generators and low amperage circuits.
All pumps have a 10 foot remote control (except PE183C which has 25 foot remote control).
CSA rated for intermittent duty. High noise level of 85-90 dBA.

Unit of Measure

Description	N/A Special crimping pump. Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select port connection with manual 4-way valve, start pump with remote control hand switch and extend connected tool.
Capacity	N/A 18 cu. inch/min
For Use With	N/A Single and Double Acting
Valve Type	N/A 4-Way
Valve Function	N/A Advance Hold Return
Control Switch	N/A Remote Control (10 ft.) on/off
Motor	N/A 1/2 hp110/115 VAC 50/60 Hz A.C., Single Phase
Reservoir Usable Oil Capacity	N/A 104 cu. inch
Maximum Pressure Output	N/A 10000 psi
RPM	N/A 12000
dBa at Idle and 10000 psi	N/A 85/90
Amp Drawn 115 V at 1000 psi	N/A 10.2
Oil Delivery at 0 psi	N/A 230 cu. inch/min
Oil Delivery at 100 psi	N/A 190 cu. inch/min
Oil Delivery at 5000 psi	N/A 25 cu. inch/min
Oil Delivery at 10000 psi	N/A 18 cu. inch/min
Dimension A	N/A 16 inches
Dimension B	N/A 4 3/4 inches
Dimension C	N/A 8 inches
Dimension D	N/A 7 1/8 inches
Dimension F	N/A 6 inches
Dimension G	N/A 5 1/8 inches
Product Weight With Oil	N/A 30 lbs.
Ship Weight	N/A 34 lbs.