• Ideal for small pressing jobs; repairing small motors, armatures, removing and installing gears, bearings, other press-fit parts.
• Bench press has 15 3/8" x 18" work area; floor press bed height is adjustable from 5" to 41" with horizontal “daylight” of 21".
• Choices of power sources: single-speed hand pump, electric/hydraulic or air/hydraulic.
• Hydraulic gauges, hoses and fittings included.
• Pump Electrical Specifications

PE10 Series - 1/4 HP, 115 volt, 60 cycle, single phase.
Also available in 230 volt, 50 cycle.

Optional air/hydraulic pumps available on request.
“Advance” position holds pressure with motor shut off. “Return” position advances cylinder with motor running and returns cylinder with motor shut off.
Typical performance based on 100 psi and 10000 psi pump specifications. Actual speeds may vary with operating conditions.

• Press bed height easily adjustable with winch's bed will not drop when handle is released.
• Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic.
• Pump Electrical Specifications

PE17 Series – 1/2 HP, 115 volt, 60 cycle, single phase.

PE21 Series – 1 hp, 115 volt, 60 cycle, single phase.

Both pumps available in 230 volt, 50 cycle

• Movable work head for full off-center pressing at full rated capacity across width of upper frame without buckling or bending.
• Maximum “daylight” is 42" x 36", making positioning of even bulky work pieces easy.
• Height of press bed is easily adjusted with winch; friction brake prevents bed from dropping and handle from spinning upon release.
• 55 ton cylinder has chrome plated piston rod and wiper seals to keep out corrosion and contamination in a shop environment.
• Presses with single-acting cylinder offer choice of 2-speed hand operated, electric/hydraulic, or air/hydraulic pump. Models with double-acting cylinder have an electric/hydraulic pump.
• Press model equipped with remote control enables operator to view work from all sides with fingertip control of cylinder piston travel.
• Press can be used horizontally for special applications with user supplied support legs.
• Pump Electrical Specifications

PE17 Series - 1/2 HP, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
PE21 Series - 1 HP, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
PQ60 Series - 2 HP, 230 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.

• Cylinder work head glides across upper frame on rollers, locks in place for off-center pressing jobs. Press may be used horizontally for special pressing applications with user supplied supports.
• Press bed is raised and lowered by winch which locks in place for insertion of bed retaining pins. Upper bolster can be lowered 8" for convenient positioning on repetitive jobs.
• Generous “daylight” of 42" x 50" accommodates bulky work pieces, uprights are placed for easy side entry of bars or shafts for straightening or bending.
• Choice of single or double acting cylinder. Hydraulic pump options include: 2-speed hand pump with large 2 gallon reservoir, PE172 electric/ hydraulic pump or “PQ” series “Quiet” electric/hydraulic pump with low noise level.

  Pump Electrical Specifications

PE17 Series - 1/2 HP, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle, add suffix “-220” to order no.
PQ60 Series - 2 HP, 230 volt, 60 cycle, single phase. Available in 115 volt, 60 cycle and 230 volt, 50 cycle.
PQ120 Series - 3 HP, 460 volt, 60 cycle, three phase. Available in 220/380 volt, 50 cycle.

• Standing 7 1/2 feet tall, these giants handle the really big jobs. May be used horizontally for special pressing applications with user-supplied supports.
• Work head has wide horizontal travel; rugged press frame withstands load of rated capacity across full width of frame.
• Winch mechanism provides easy positioning of press bed, locks in place for insertion of retaining pins. Upper bolster can be lowered 11" for convenient positioning on repetitive jobs.
• Uprights are placed for easy side entry of bars or shafts for straightening or bending.
• Fast cylinder approach is provided by PQ1204S “Quiet” electric/hydraulic pump. Has remote control hand switch, enabling operator to view work from all sides with fingertip control of cylinder piston travel.

Pump Electrical Specifications
PQ120 Series - 3 HP, 460 volt, 60 cycle, three phase.
Also available in 220/380 volt, 50 cycle

Make your Power Team press even more versatile with one of these accessory sets. These sets will eliminate makeshift set-ups. Many of these items can be used with pullers you already have.

Individual press accessories may be ordered separately.

Caution: - Pushing adapters are designed for use with specific shaft sizes, and depending on the condition of the shaft ends, the adapter may not withstand the full press tonnage. Always use a protective blanket or other suitable guard when pressing.

• Adjustable legs spread to clear obstacles, telescoping boom for extra reach. Rugged construction, reliable hydraulics.
• Boom collapses completely and legs fold for compact storage.
• 2-speed hydraulic hand pump provides fast boom travel and precise operator controlled descent.
• Roller bearing wheels and a steering dolly provide ease of mobility. Lifting chain is included.

Frame shipped unassembled.