Item # PE172A, Electric Pump Hydraulic PE17 Series Up to 55 Ton On Metro Hydraulic

Catalog

Request Information

For maintenance and construction applications.
For use with single-acting or double-acting cylinders at operating pressures to 10000 psi.
For intermittent duty; starts under full load.
Equipped with 1/2 hp, 3450 rpm, single-phase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. cord).
Low amperage draw; small generators and low amperage circuits can be used as power source.
Extremely quiet with noise level ranging from 67-81dBA.
The remote motor control switch

Unit of Measure

Description	N/A Best suited for crimping, punching, pressing. Not for lifting. Thermoplastic reservoir.
Capacity	N/A 17 cu. inch/min
For Use With	N/A Single Acting
Valve Type	N/A Auto/Dump Manifold
Valve No.	N/A 45554
Valve Function	N/A Advance Return
Control Switch	N/A Remote Motor Control (10 ft.) on/off
Motor	N/A 1/2 hp 110/115 V 50/60 Hz, Single Phase
Reservoir Usable Oil Capacity	N/A 295 cu. inch
Speed	N/A 2
Maximum Pressure Output	N/A 10000
RPM	N/A 3450
dBa at Idle and 10000 psi	N/A 67/81
Amp Drawn 115 v at 10000 psi	N/A 10
Oil Delivery at 0 psi	N/A 290 cu. inch/min
Oil Delivery at 100 psi	N/A 190 cu. inch/min
Oil Delivery at 5000 psi	N/A 20 cu. inch/min
Oil Delivery at 10000 psi	N/A 16 cu. inch/min
Dimension A	N/A 18 1/2 inches
Dimension B	N/A 7 inches
Dimension C	N/A 11 3/8 inches
Dimension D	N/A 7 1/8 inches
Dimension E	N/A 14 7/8 inches
Dimension F	N/A 9 1/4 inches
Dimension G	N/A 5 1/8 inches
Product Weight With Oil	N/A 45 lbs.
Ship Weight	N/A 50 lbs.