10000 psi, 3/8" ports, 5 gpm max flow rate.
Application: Single acting cylinders.
Actuation: Solenoid operated, 115 volt, 50/60 Hz.
Functions: Cylinder piston advances when solenoid is de-energized and pump is running. When solenoid is energized, oil is directed to reservoir, and piston returns. For “hold” position, pump is stopped with solenoid de-energized.
Used on these pumps: PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series.
Valves above are shipped without control switch. Use 202777 remote hand switch.When this valve is mounted, the pump must be equipped with an outlet check valve.
Conversion kit 251528 must be used when mounting the valves on PA17 or PE17 pumps.
To prevent sudden, uncontrolled descent of a load as it is being lowered, use a No. 9596 Load Lowering Valve or No. 9720 Counter Balance Valve in conjunction with the directional valve used in your application.
When ordering any valve for a PE30 or PG30 series pump, 1/2" longer mounting screws are required.For valves 9579 order four 10856 cap screws.