MDI Manufacturing & Design Inc.
MDI Manufacturing & Design Inc.
7687 San Fernando Road
Burbank, CA 91505
Phone: 818.246.2300
Fax: 818.767.6469
Email: info@mdionline.net
Website: www.builtsystems.net
Print Back
  • Deliver a powerful punch to operate single-acting or doubleacting cylinders.
  • Integral roll cage protects pump from abuse.
  • 1 hp, single phase, permanent magnet motor.
  • Start under full load even when voltage is reduced to 50% of nominal rating.
  • High performance to weight ratio.
  • Quiet operation: 82 dBA at 10,000 psi and 87 dBA at 0 psi. CSA rated for intermittent duty.
  • Remote controls and/or solenoid valves feature 24 volt controls.
    “Posi-Check” valve design, “Posi-Check” guards against pressure loss when valve is shifted from “advance” to “hold” position.
    Shipped with 2 gal. of oil.
Unit of Measure

Specifications

Description

 N/A PE303, except has 1 3/4 gal. reservoir.

Capacity

 N/A 30 cu. inch/min

For Use With

 N/A Single Acting

Valve Type

 N/A 3-Way, 3 Position.

Valve No.

 N/A 9520

Valve Function

 N/A Advance Hold Return

Control Switch

 N/A On/Off/ Pulse Switch

Motor (4000 rpm)

 N/A 1 hp 110/115 VAC, 50/60 Hz, Single Phase

Reservoir Usable Oil Capacity

 N/A 380 cu. inch

Maximum Pressure Output

 N/A 10000 psi

Max. idle & 10000 psi

 N/A 87/82

dBA at 1155 V at 10000 psi

 N/A 13

Amp Drawn 115 V at 1000 psi

 N/A 13

Oil Delivery at 100 psi

 N/A 300 cu. inch/min

Oil Delivery at 500 psi

 N/A 200 cu. inch/min

Oil Delivery at 1000 psi

 N/A 44 cu. inch/min

Oil Delivery at 5000 psi

 N/A 38 cu. inch/min

Oil Delivery at 10000 psi

 N/A 30 cu. inch/min

Length

 N/A 13 1/2 inches

Width

 N/A 9 1/2 inches

Height

 N/A 16 1/2 inches

Product Weight With Oil

 N/A 49 lbs.

Ship Weight

 N/A 64 lbs.