MDI Manufacturing & Design Inc.
MDI Manufacturing & Design Inc.
7687 San Fernando Road
Burbank, CA 91505
Phone: 818.246.2300
Fax: 818.767.6469
Email: info@mdionline.net
Website: www.builtsystems.net
17 1/2 Ton Capacity can be used with Nos. 1124 and 1130 bearing pulling attachments or Nos. 679 and 680 pulley pulling attachments. May also be used with Nos. 1150, 1151, 1153, 1165, or 1166 internal pulling attachments Legs ends threaded 3/4 Inch - 18. No. Spread 1106 legs and No. 24827 leg ends included. Wt., 20 lbs., 12 Oz.
Unit of Measure

Specifications

Max. Reach

 11 1/2 inches

Max. Spread

 3 1/8 - 11 3/4 inches

Screw size

 1 - 14 x 13 1/4 inches

Thread Size

 5/8"-18

Weight

 20 lbs.

Weight

 12 oz.

Ship Weight

 20 lbs.

Tool Assembling

N/A

Assembling the tool to apply pushing or pulling force:
1.Determine if you want the tool’s forcing screw to push or pull.
2. To exert pushing force, the forcing nut is installed beneath the cross block, as shown on left.
3. To cause the forcing screw to pull, the forcing nut is placed on top of the cross block.
4. The sliding plates must always be placed on the opposite side of the cross block from the forcing nut.