MDI Manufacturing & Design Inc.
MDI Manufacturing & Design Inc.
7687 San Fernando Road
Burbank, CA 91505
Phone: 818.246.2300
Fax: 818.767.6469
Email: info@mdionline.net
Website: www.builtsystems.net
Print Back
  • Accurate to within 1%.
  • Larger display characters than ordinary digital gauges.
  • Long-life pressure transducer.
  • 1/4" NPTF male threads for the pressure connection.
  • 6 foot signal input cable connects to back of display unit.
Unit of Measure

Specifications

Pressure Range

 N/A 0-10000 psi

Weight

 N/A 2.3 lbs.

Ship Weight

 N/A 2.8 lbs.

Standard Pack Qty

 N/A 1

Features

N/A

  • Pressure values are displayed on large red LEDs in 10 psi or bar increments.
  • Peak hold feature with reset toggle switch and "Peak On" indicator; Hi/Low set point feature with relay outputs for Hi/Low alarms and/or control signals.
  • A slow flashing display indicates pressure below the low limit; fast blinking display alerts if limit is exceeded.
  • High and low limit relays are rated to 5 amps at 115 volts.
  • Operating temperature of 0-140°F for the electronic display and -20 to 180°F for the transducer. Gauge housings are extruded aluminum 1/8 DIN enclosures (NEMA 1 rating).
  • When power cable is connected to gauge, display will scroll all characters, performing a self- diagnostic routine.