MDI Manufacturing & Design Inc.
MDI Manufacturing & Design Inc.
7687 San Fernando Road
Burbank, CA 91505
Phone: 818.246.2300
Fax: 818.767.6469
Email: info@mdionline.net
Website: www.builtsystems.net
Print Back
  • For maintenance and construction applications.
  • For use with single-acting or double-acting cylinders at operating pressures to 10000 psi.
  • For intermittent duty; starts under full load.
  • Equipped with 1/2 hp, 3450 rpm, single-phase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. cord).
  • Low amperage draw; small generators and low amperage circuits can be used as power source.
  • Extremely quiet with noise level ranging from 67 - 81dBA.

Typical oil delivery flow is given. Actual flow will vary with field conditions.
The remote motor control switch on 220V, 50 cycle PE17 series pumps is 24 volt.
Usable oil is calculated with the oil fill at the recommended level of 11/2" below reservoir cover plate.
Control switch on PE17 series wired with line voltage.
The dBa is measured at 3 ft. distance all sides.
Item Image - PE174
Unit of Measure
Items Item Image - PE172
PE172
Electric Pump Hydraulic PE17 Series Up to 55 Ton
Price $2,983.41
 Item Image - PE172M
PE172M
Electric Pump Hydraulic PE17 Series Up to 55 Ton
Price $3,333.42
 Item Image - PE172
PE172S
Electric Pump Hydraulic PE17 Series Up to 55 Ton
Price $4,316.67
 Item Image - PE172SM
PE172SM
Electric Pump Hydraulic PE17 Series Up to 55 Ton
Price $4,672.88
 Item Image - PE172
PE172A
Electric Pump Hydraulic PE17 Series Up to 55 Ton
Price $3,575.70
Description N/A Base model pump has 1/2 hp pump with 2 gallon thermoplastic reservoir. N/A PE172, except has 21/2 gal. aluminum reservoir. N/A PE172, except has solenoid operated valve. N/A PE172S, except has aluminum reservoir. N/A Best suited for crimping, punching, pressing. Not for lifting. Thermoplastic reservoir.
Capacity N/A 17 cu. inch/min
For Use With N/A Single Acting
Valve Type N/A 2 - Way N/A 3 - Way N/A 2 - Way N/A 3 - Way N/A Auto/Dump Manifold
Valve No. N/A 9517 N/A 9579 N/A 9579 N/A 9517 N/A 45554
Valve Function N/A Advance Return (Auto) N/A Advance Return (Auto) N/A Advance Hold Return N/A Advance Hold Return N/A Advance Return
Control Switch N/A Remote Motor Control (10 ft.) on/off
Motor N/A 1/2 hp 110/115 V 50/60 Hz, Single Phase N/A 1/2 hp 110/115 V 50/60 Hz, Single Phase N/A 1/2 hp 110/115 VAC 50/60 Hz, Single Phase N/A 1/2 hp 110/115 VAC 50/60 Hz, Single Phase N/A 1/2 hp 110/115 V 50/60 Hz, Single Phase
Reservoir Usable Oil Capacity N/A 295 cu. inch N/A 375 cu. inch N/A 295 cu. inch N/A 375 cu. inch N/A 295 cu. inch
Speed N/A 2
Maximum Pressure Output N/A 10000
RPM N/A 3450
dBa at Idle and 10000 psi N/A 67/81
Amp Drawn 115 v at 10000 psi N/A 10
Oil Delivery at 0 psi N/A 290 cu. inch/min
Oil Delivery at 100 psi N/A 190 cu. inch/min
Oil Delivery at 5000 psi N/A 20 cu. inch/min
Oil Delivery at 10000 psi N/A 16 cu. inch/min
Dimension A N/A 18 1/2 inches N/A 18 1/8 inches N/A 18 1/2 inches N/A 18 1/8 inches N/A 18 1/2 inches
Dimension B N/A 7 inches N/A 6 5/8 inches N/A 7 inches N/A 6 5/8 inches N/A 7 inches
Dimension C N/A 11 3/8 inches N/A 11 1/2 inches N/A 11 3/8 inches N/A 11 1/2 inches N/A 11 3/8 inches
Dimension D N/A 7 1/8 inches N/A N/A 7 1/8 inches N/A N/A 7 1/8 inches
Dimension E N/A 14 7/8 inches N/A 14 1/2 inches N/A 14 7/8 inches N/A 14 1/2 inches N/A 14 7/8 inches
Dimension F N/A 9 1/4 inches N/A 9 1/2 inches N/A 9 1/4 inches N/A 9 1/2 inches N/A 9 1/4 inches
Dimension G N/A 5 1/8 inches N/A N/A 5 1/8 inches N/A N/A 5 1/8 inches
Product Weight With Oil N/A 45 lbs. N/A 53 lbs. N/A 45 lbs. N/A 53 lbs. N/A 45 lbs.
Ship Weight N/A 54 lbs. N/A 65 lbs. N/A 68 lbs. N/A 77 lbs. N/A 50 lbs.