Call Us Today: (800) 633-8234
  • For maintenance and construction applications.
  • For use with single-acting or double-acting cylinders at operating pressures to 10000 psi.
  • For intermittent duty; starts under full load.
  • Equipped with 1/2 hp, 3450 rpm, single-phase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. cord).
  • Low amperage draw; small generators and low amperage circuits can be used as power source.
  • Extremely quiet with noise level ranging from 67-81dBA.
    The remote motor control switch on 220V., 50 cycle PE17 series pumps is 24 volt.
    Usable oil is calculated with the oil fill at the recommended level of 1 1/2" below reservoir cover plate.
    Available with 220 V., 50 Hz motor (to order, place suffix “50-220” behind pump order number).
    “Advance” position holds pressure with motor shut off. “Return” position advances cylinder with motor running and returns cylinder with motor shut off.
Unit of Measure


N/A PE172A, except has aluminum reservoir.


N/A 17 cu. inch/min

For Use With

N/A Single Acting

Valve Type

N/A Auto/Dump Manifold

Valve No.

N/A 45554

Valve Function

N/A Advance Return

Control Switch

N/A Remote Motor Control (10 ft.) on/off


N/A 1/2 hp 110/115 V 50/60 Hz, Single Phase

Reservoir Usable Oil Capacity

N/A 375 cu. inch


N/A 2

Maximum Pressure Output

N/A 10000


N/A 3450

dBa at Idle and 10000 psi

N/A 67/81

Amp Drawn 115 v at 10000 psi

N/A 10

Oil Delivery at 0 psi

N/A 290 cu. inch/min

Oil Delivery at 100 psi

N/A 190 cu. inch/min

Oil Delivery at 5000 psi

N/A 20 cu. inch/min

Oil Delivery at 10000 psi

N/A 16 cu. inch/min

Dimension A

N/A 18 1/8 inches

Dimension B

N/A 6 5/8 inches

Dimension C

N/A 11 1/2 inches

Dimension E

N/A 14 1/2 inches

Dimension F

N/A 9 1/2 inches

Product Weight With Oil

N/A 53 lbs.

Ship Weight

N/A 66 lbs.