HomeOnline CatalogServicesManufacturers Catalog About Us Blog Request for Quote Contact Us
Call Us TodayCall Us Today: (800) 633-8234 | E-Mail: sales@metrohydraulic.com
GO
View Cart View RFQs Express Ordering
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Pullers > SPX Power Team Pullers  
 

SPX Power Team Pullers

 

Click on a Product to view details.

Item Image - Mechanical Jaw Pullers

Mechanical Jaw Pullers 1-25 Ton Capacity, 2 & 2/3 Jaw Pullers

(22)
  • Grip-O-Matic feature on all pullers. The harder the pull, the tighter the grip for removing gears, bearings and countless other press fitted parts.
  • 2-way, 3-way and 2/3 way combination pullers make it easy to select a specific puller for a specific application.
  • Forged from high quality steel, heat treated and subjected to rigorous tests which exceed rated puller capacity.
  • Alloy steel heads are forged for maximum strength.
  • Forcing screw threads are rolled, not cut. This process creates a smoother and stronger thread.
  • Heat treated alloy steel cross bolts for maximum shear strength.
  • Machined puller jaw toes produce larger and stronger pulling toes.
Item Image - Mechanical Push Pullers

Mechanical Push Pullers 10 Ton Capacity

(5)
  • Can apply a pushing or pulling force, depending on how the puller is set up.
  • Optional leg kits adapt your Push-Puller to extra long or extra short reach.
  • A wide variety of threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Push-Pullers.
  • Each Push-Puller’s specified tonnage “capacity” is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the “capacity”. Always select the largest “capacity” puller and the shortest legs that will fit the job.
Item Image - Mechanical Push Pullers

Mechanical Push Pullers 17 1/2 Ton Capacity

(6)
  • Can apply a pushing or pulling force, depending on how the puller is set up.
  • Optional leg kits adapt your Push-Puller to extra long or extra short reach.
  • A wide variety of threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Push-Pullers.
  • Each Push-Puller’s specified tonnage “capacity” is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the “capacity”. Always select the largest “capacity” puller and the shortest legs that will fit the job.
Item Image - Mechanical Push Pullers

Mechanical Push Pullers 30 Ton Capacity

(4)
  • Can apply a pushing or pulling force, depending on how the puller is set up.
  • Optional leg kits adapt your Push-Puller to extra long or extra short reach.
  • A wide variety of threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Push-Pullers.
  • Each Push-Puller’s specified tonnage “capacity” is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the “capacity”. Always select the largest “capacity” puller and the shortest legs that will fit the job.
Product Image -1 1/2 Inch - 9 Inch Jaw Spreads

Pulling Attachments 1 1/2 Inch - 9 Inch Jaw Spreads

(9)
  • Handles internal pulling jobs, such as, bearing/bearing cup removal, bushing removal, oil seals, etc.
  • Remove hard to get at parts easily and without damage!
  • Use with corresponding Power Team Slide Hammer or Push-Puller.
  • Adjustable jaws fit various diameters
  • These attachments may not withstand the full tonnage the pullers they are used with. The shape and condition of the part being pulled affects the tonnage at which the jaws may slip off. Always select the largest attachment which will fit behind the part being pulled.
Product Image - Bearing And Pulleys

Pulling Attachments Bearing & Pulley

(10)
  • “Knife-like” edges fit behind bearings and other hard-to-grip parts for easy removal, even where clearance is limited.
  • Usable with both Grip-O-Matic jaw type pullers and Push-Pullers.
  • All puller blocks are made from forged alloy steel
Product Image - Hydraulic Pullers

Pullers Hydraulic 5, 10, 17 1/2, 30 & 50 Ton

(19)
  • Remove gears, bearings, and other press-fitted parts with speed and ease.
  • Broad capacity range of 5, 10, 17-1/2, 30 and 50 tons.
  • 5 and 10 ton sets include: single-acting, spring return hydraulic cylinder with hose, coupler and dust cap; single-speed hydraulic hand pump; puller.
  • 17-1/2, 30 and 50 tons sets include: Power-Twin single acting, spring return hydraulic cylinder with hose, coupler and dust cap; single-speed hydraulic hand pump; puller, adjusting screw and crank.
  • Hydraulic cylinder of all models is readily removable from puller for use with pump in other hydraulic applications. You get maximum maintenance versatility for your investment.
Product Image - Push-Pullers Hydraulic

Push Pullers Hydraulic 17 1/2, 30-50 Ton

(9)
  • Can apply a hydraulic pushing or pulling force, depending on how the puller is set up.
  • Each unit includes perfectly matched hydraulic components that can be detached from the Push- Puller for other tasks requiring dependable Power Team power; assuring maximum return on your investment.
  • Optional leg kits adapt your Push-Puller to extra long or extra short reach.
  • A wide variety of threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Push-Pullers.
Item Image - Hydraulic Puller Sets

17 1/2 ton Hydraulic Master Puller Sets

(2)
    Having this Power Team puller set at your fingertips will not only reduce your downtime, but also increase your profits.

Wooden storage box No.308435OR9 is included. 36" L x 17 1/2" W x 14" D Metal storage boxes also available.
Item Image - Hydraulic Puller Set

17 1/2 ton Hydraulic Puller Sets


    This set includes a 3-jaw puller and a Push-Puller. Ideal for heavy duty applications; put this set to work wherever large gears, bearings, wheels, pulleys, etc. are found.

Wooden storage box No.308435OR9 is included with the sets. 36" L x 17 1/2" W x 14" D. Metal storage boxes also available
Item Image - Hydraulic Puller Sets

30 Ton Capacity Puller Set


    Just what you need for those big jobs. Not only do you get a 30 ton hydraulic Push-Puller, you also get a 2-jaw and 3-jaw hydraulic puller. Plus, many popular accessories and the hardware to tackle the big jobs right away.

Wooden storage box No. 3084380R9 is provided with the sets. 40" L x 16" H x 16" D Metal storage boxes also available
Site created by Thomas Web Solutions and powered by Navigator Platform
Metro Hydraulic Jack Co. | Single Source for All Your Hydraulic Needs